Skip to content Skip to sidebar Skip to footer

Post-harvest: avoid losses by controlling moisture in coffee.

Post-harvest of coffee Extra attention is required between June and November, a period when many farms finalize the harvesting, drying, processing, and marketing of grains. During this stage, avoiding rehumidification is crucial to preserving the quality and commercial value of the product.

Rehumidification occurs when coffee, after reaching a safe moisture level, reabsorbs water from the environment, the floor, walls, or damp surfaces. The problem can occur at different stages, mainly on farms with high relative humidity or inadequate management of drying yards, dryers, silos, and warehouses.

Rehumidifying coffee can compromise its quality.

Coffee is a hygroscopic product, meaning it exchanges water with the environment until it reaches a moisture equilibrium that depends on the temperature and relative humidity of the air.

When dried grain remains in damp places, on cold floors, or in contact with wet surfaces, it can absorb water again. In general, drying aims for a moisture range close to 11% on a wet basis for storage, as recommended by research.

In practice, the problem can start right in the drying yard. Leaving the coffee overnight in a thin layer, without windrowing or covering, increases its exposure to dew, fog, and mist.

The risk also arises during transport between the drying yard, dryer, silo, and warehouse. Piles of coffee directly on the ground, damp walls, and leaks can promote water absorption by the beans.

High humidity levels promote losses in stored coffee.

Increased moisture content above the safe range can reactivate bean respiration and cause localized heating within the coffee mass. This process can also lead to dry matter loss and promote the development of sensory defects.

Another risk is the development of fungi on the surface of the grains and inside the stacks. This can result in undesirable odors and flavors, such as mold and sourness, as well as increasing the risk of mycotoxin contamination.

The quality of the beverage can also be affected. In specialty coffees, the problem can result in a drop in score. In conventional coffee, it can increase the incidence of defective beans and cause commercial devaluation.

Rehumidification can still leave the batch with uneven moisture content, mixing wetter and drier beans. This condition makes roasting difficult and impairs standardization.

When the producer needs to perform a new drying process to correct the problem, the coffee undergoes thermal and mechanical stress again, which can increase the occurrence of broken beans and internal defects.

Yards require care during drying.

Planning the drying load is one of the measures to reduce risk. The volume of coffee must be compatible with the available capacity in the drying yard and equipment, preventing batches from remaining exposed for longer than necessary.

In the late afternoon, piling the coffee beans up helps reduce the area of contact between the coffee and the humid air overnight. During critical periods, mobile covers, tarpaulins, or appropriate greenhouses can also be used to reduce moisture gain.

Floor maintenance is another important point. Deep cracks and puddles can retain water and increase humidity near the coffee mass.

Hair dryers can also promote rehumidification.

In mechanical dryers, prolonged interruptions can leave the coffee hot in a humid environment. Removing the beans before they reach the proper moisture content also increases the risk of problems during storage.

Controlling the drying air temperature must respect the limits recommended by research and equipment manufacturers, avoiding damage to the grain and only superficial drying.

At the end of the process, gradual cooling within the equipment reduces thermal shock. This measure also helps prevent condensation when the coffee is transferred to cooler silos or storage areas.

Storage bins and warehouses need to block out moisture.

Structures built directly on the ground can allow moisture to rise into the coffee mass. Therefore, insulating the floor or using elevated silos are preventative measures.

Ventilation also needs to be adequate. When an aeration system exists, its use should be judicious and, preferably, occur during times with drier air, preventing the process from causing rehumidification.

Cleaning the structures before the arrival of a new harvest is also important. Coffee residue, dust, and impurities can retain moisture and contribute to contamination points.

When storing items in sacks or big bags, the bags should not be placed directly on the floor. Using pallets or skids helps reduce contact with moisture.

The batteries also need to be kept away from the walls to allow air circulation and reduce the risk of condensation. Leaks, seepage, and poorly sealed doors should be repaired.

Transportation is another point of attention.

Protection must continue until shipment. Truck bodies and containers must be dry, clean, and free of water entry points before loading.

Torn or poorly secured tarpaulins can leave cargo exposed to rain, dew, and splashes during transport. Therefore, the protection should be checked before departure.

It is also important to reduce outdoor waiting times, avoiding having coffee served in uncovered patios while waiting for passengers to board.

Monitoring humidity helps identify risks.

Using a coffee moisture meter is one of the main tools for monitoring the product during post-harvest. Readings should be taken frequently and at different points in the coffee mass.

Significant differences between surface and internal samples may indicate non-uniformity and possible localized rewetting. Monitoring these values over time helps identify changes before quality is compromised.

A musty, moldy, or fermented odor is also a warning sign. The formation of clumps or lumps of agglutinated coffee, especially inside piles or sacks, warrants further investigation.

During storage, systematic increases in moisture content in samples may indicate that the batch is absorbing water again.

Post-harvest requires integration between stages.

Preventing rehumidification doesn't depend on a single measure. Separating batches by variety, plot, harvest time, and stage of maturity facilitates control over drying and storage.

Good practices begin at harvest time, with the reduction of green or fermented fruit, which can hinder uniform drying.

The processing should also be carried out with proper adjustment of peelers, demucilagers, and processing machines. This measure reduces the presence of defects and points of moisture accumulation.

Another factor is team training. Everyone involved in post-harvest needs to understand the importance of moisture control and know how to identify early signs of problems.

Each property has specific conditions regarding climate, drying yard type, drying equipment, and storage capacity. Therefore, strategies need to be adapted to the local reality, with support from qualified technical assistance to guide the necessary adjustments.

THE MM Cereais works with the best grains on the market and also keeps you up to date with the latest news and analyses on agribusiness.
Don't forget to follow our social networks.

Access News Source